Deciding when to replace an OTR tire can be a difficult balancing act because you cannot keep using an OTR tire beyond a certain point or it will cause a blowout. Blowouts can happen for a variety of reasons like:

• Damage to the tire itself from debris and constant use
• Over time overinflating and under inflating an OTR tyre will make it give way before it normally would
• Heat build up from constant use in hot weather or improper mounting

OTR tires are often used under rough conditions and they are under extreme stress from both the weight of the machine and their internal air pressure, so when an OTR tyre does give way, it can sometimes resemble an explosion. Workers have been injured or killed when this happened in the past and equipment can be damaged as well.

If you do not want this to occur on your worksite then you need to choose the best Xtreme OTR Tyre supplier. No one can prevent blowouts entirely, but by buying high quality OTR tires, you can minimize the danger to both your workers and your pocketbook.

Xtreme OTR Tyre has technicians that focus solely on a single aspect of tire engineering including:

• A compounding specialist
• A radial design specialist
• A bias design specialist
• A plant manager

All of these experts work closely together in order to produce the best of OTR tyres. Tires produced by Xtreme OTR Tyre also have their earthmover tire limited warranty for 20 to 63 inch rim diameter tires, just in case you run into problems. If you operate in another country, you can still take advantage of Xtreme OTR Tyre’s wide selection of products. International customers will receive their orders from a specially bonded warehouse with no United States duty charges to worry about.

There are many benefits to using a manufacturer with on-site maintenance programs:

1. Safety – They are the expert in OTR tyres so you will not have to worry about any problems during installation or operation of the tyre.
2. Cost – If a tyre expert is doing your maintenance then you no longer have to guess about when to replace them. You can continue to use them until the very last minute, which can save you quit a bit of money. Plus, having an expert take care of the tire will keep it in better shape and extend the life even longer.
3. Material Management – A tyre manufacturer will provide you with all the information you need to make future decisions. They can let you know everything from which tires you should be using in the future to if your employees are maintaining proper pressure in the tires.
4. Warranty – If you let your own workers change an OTR tyre then you can only hope for the best but a high quality trye supplier will warranty their work and stand behind it.
5. Down Time- If you have blown a tire on an earthmover then you are losing money as long as it sits idle. So, you don’t want to compound the problem by having the driver or some other employee stop what they are doing to change the tyre.

For the first time in years, we will have more rubber available than we know what to do with. Signs point toward the rubber crop having a record harvest this year. Goldman Sachs has estimated that the global supply of rubber will exceed its demand by over 413,000 metric tons. As we all know if supply exceeds demand then there is a sudden price drop and this should result in a big one.

To put this in perspective, last year the demand for rubber exceeded supply by over 87,000 metric tons. Last year rubber was the fifth worst performing commodity and this over abundance will push it even farther down the ranks this year. On top of the bumper crop, China may contribute to prices dropping even further. This year the Chinese economy has been going through a slow period and they are the world’s largest consumer of rubber. Last year the Chinese economy increased by over 9% but this year experts are looking for around 8.5%.

All of these factors will combine to drive down the price of rubber. That will in turn cause a price drop in rubber products like tires. Once the prices start to fall on OTR tires it will be the perfect time to buy. You may not be the type to invest in the stock market but you should definitely consider investing in tires. By that I mean buying a lot and tucking them back in your warehouse so that you have enough to last your equipment for the foreseeable future.

If it becomes necessary to change an OTR tire there are a few things that you should keep in mind:

• Never loosen the lugs on a tire that is still under pressure. It could explode if damaged. Deflate the tire that you will be removing as well as the tire next to it if it’s a dual assembly.
• To speed up the deflation of the tire, workers often remove the valve stem entirely. If you do so, wear eye protection and once you have pulled the valve stem stand away from the tire just in case.
• When the tire is flat you can begin removal. Always use a dolly or jack to move the components around. The parts are heavy enough to crush any appendage that gets caught underneath them.
• When you use a demounting tool, make sure that you apply force away from your body. They are under enormous pressure and can easily injure you if they slip.
• Once you have separated the rim from the tire, inspect everything. You need to make sure that all of the parts are in good working order and do not show signs of wear. Clean the rim to remove any rust or grit before installing the replacement parts.

Only under emergency conditions do we recommend that you change an OTR tire yourself.  Call a highly qualified OTR tire supplier who provides onsite maintenance for avoid any accident or injury.

Make sure that you keep your OTR equipment’s alignment in Check. This will prevent uneven wear on your tires, saving you a ton of money over time. With heavy machinery usually being driven over uneven work surfaces to get the job done it’s much easier to knock the alignment out. This can cause extremely hazardous situations for drivers, because you may not be able to see wear on the inside of the tire. Blow-outs and flat tires can wreak havoc on your site, cause a dangerous situation, and slow down productivity.

XTREME OTR Tires, L.L.C is a custom OTR Tire Manufacturer and distributor that has a wonderful philosophy on making sure your OTR tires stay in good condition with on-site OTR Tire Maintenance. They know that each construction job, and site, is different and they provide customized plans for each client.

Their Maintenance Programs cover:

• Safety
• Preventative Measures
• Predictive
• Planned Maintenance

They provide a quality product as well as programs to ensure that their products stay in top shape. Because they provide custom tires to many of their customers, implementing an effective management of their OTR tires is crucial.

This insures:

• Significant Cost Savings
• Safety
• Equipment Up-Time

XTREME OTR Tires has a great variety of tires by size, tread, and application. Since they are not only a distributor, but the manufacture as well they are able to provide customized services for your company’s needs. There is no reason to go to any other OTR tire distributor, as it’s all in one place at XTREME OTR Tires, L.L.C.

Great OTR tire maintenance tips:

• Check your tire pressure at the beginning of every work shift and at the end of the day after the equipment has been allowed to cool down. It doesn’t take up a lot of time, and it can benefit you in so many ways.
• Add or reduce tire pressure immediately if needed. Running on under inflated OTR tires can be just as dangerous as over inflated ones. This can cause slippage that could lead to a hazardous situation, and over inflation can lead to blow outs.
• Make sure to store unused OTR tires in a dry and dark place. Also ensure that they are away from chemicals and other elements that could cause erosion.
• Check your tires used, and unused, often for cracks rocks, punctures, or anything else that could lead to a blow out! This is a crucial step to making sure that accidents don’t happen.
• When you need new tires, make sure you get them. Don’t run a machine if you feel uneasy about the condition of the tire.

Before each shift is an excellent time to run through these few small maintenance tips. It’s really worth it when you think about the repercussions. Maintaining OTR tires is something that you shouldn’t skimp on.  When it’s time to get new OTR tires there is an excellent OTR tire distributor that makes the entire process so easy. They also are one of the only OTR tire companies that offer onsite maintenance to make sure you’re getting the most out of your tires!

What can your recycled OTR tires be used for?

• Some shoes and sandals have soles made from recycled tires.
• You can used old tires as back-fill in your construction sites.
• Recycled tires can be used as haul mats for cattle or horses.
• They break down the tires to make roofing tiles.
• Good athletic tracks, like running tracks, are made with tires.
• Flooring in commercial buildings.
• Shower Tiles.
• Padding for Carpets.
• Speed Bumps.
• Rubber mulch for playgrounds or mats underneath children’s play areas.
• Fuel.

What are some of the benefits of recycling tires?

• Conservation of Landfill space.
• Prevents tires in landfills from creating fires, lasting for months.
• Provides new tires and products.

There are so many benefits of OTR tires when it comes to products we use every day. They are used on mining equipment and construction sites to make our lives a little easier with what they provide. Recycling the tires can have the same effect, with recycled material cost of products made from OTR tire waste goes down. Just remember, when it’s time to get new OTR tires for your site give XTREME OTR Tires a call. They have a huge selection of tires by tread and size to make sure they have what you need to get the job done!

Egyptians, given their great wealth and power, also were successful miners and excelled at mining gold and malachite. They were also one of the first civilizations to mine in regions well beyond their land, such was their hunger for these highly regarded minerals. Romans, however, were the innovative force. Quarrying, which had been previously carried out on a small scale, became much larger. They used water to power bigger machines and equipment that made a larger scale possible. Demand for materials made from minerals and metals also increased, with the need for more coins in the prospering markets, as well as swords and other weaponry. Other innovations were made to enhance machinery, including perhaps early versions of  tires. Tools and equipment were continually worked on and updated as the means to do so arose.

This all lead us to be where we are today. Through demand and innovation and development of technology, we’ve been able to build on the past and create more powerful and effective machinery to assist us in making use of the earth’s rich resources. If you’re looking to purchase tires for heavy equipment, there’s one OTR supplier out there that has the best quality and the best price.

1. Transfer Dump Truck is the one that hauls two separate trailers.
2. The Truck and Pup is very much like the first dump truck listed here, except that it can also self load.
3. The Standard Dump Truck is the one that we’re all most familiar with. It’s a truck with a large bucket on the back and used to haul any number of things.
4. Super dump Trucks are perhaps the most powerful and productive of all the dump trucks, meaning that they appeal greatly to everyone, including your otr supplier, who has to work with them.
5. Semi-trailer Bottom Dump Trucks. These ones you won’t see very often as their function tends to be very specialized. The most characteristic feature is the frame of the trailer, which looks somewhat like a bridge, and the enclosed center where the loose material is hauled.
6. Semi-trailer End Dump Trucks. Again, this is a specialized truck that is used on uneven surfaces. These trucks are marked by quick unloading as well.
7. Winter Service Vehicles are another one that those of us who live in icy and snowy places have seen time and time again dumping salt onto the roadways.

There are of course many more types of dump trucks, all with their own set of pros and cons and uses. If you are in need of otr tires for dump trucks, loader, cranes or other mining/construction heavy equipment there’s one otr supplier with years of experience and fair prices that treats every customer like the only one.

New machines were built but lack of technology meant that these machines were not as useful for earthmoving, which requires a number of different things, including digging, moving, raising, hauling and dumping. Earthmover tires were still not present, and therefore many of the tires lacked weight-bearing properties that assisted in moving heavy loads. Most of this early equipment was designed to assist farmer’s in harvesting or planting seasons, giving us many versions of the plow and combine harvester, which moved from steam to gasoline power in a fairly short period of time. For earthmoving projects, vehicles and machines were needed that had plenty of off road mobility and had their own power source. These things weren’t incorporated into design until the 21^st century, when the technology and innovations had developed to create them. With that also came revolutionary designs in tires that came to be earthmover tires.

It took time to get us where we are today and working at the capacity that we do, and we continue to improve with new designs to enhance the machines we already have been working with for decades. If you’re looking to purchase heavy equipment tires, there’s one otr tire supplier that has the best deals around.