1) Accurate tire pressure should be maintained when driving. The correct amount of pressure needed by a tire is provided by the manufacturer.
The correct pressure responding to the requirement should be maintained when driving.
You should check the pressure of all the tires including the spare in cooling state. If the pressure reduces too fast, find out the reason such as: nail punctures, cuts, aging valve mouth rubber, the dehiscence, etc. Check the pressure before any long distance driving. Be sure to check tire pressure after it cools.
Always remember: Using tires with incorrect inflating pressure is dangerous.
2) Driving at high speed can be dangerous.
When driving at a high rate of speed (even with correct inflation pressure) compared to low speed driving, the chance of damage when it meets the path of an obstacle is increased. Always remember: never exceed the reasonable speeds required by the driving condition and regulated by the law. Please lower the speed when making a turn or meeting a hole and other obstacles in the road.
If a motorist hits holes or other outside obstacles at a high rate of speed it may cause serious tire extrusion\distortion between the alluvial deposit and rim flange, tearing the curtain off the gauze, and then the tire internal air from the gauze will rise and form the drum package. Always remember: if this is found to be the case, replace the tire with drum package at once.
3) Check the tire’s condition as often as possible.
Frequently check for punctures, cracks, cuts, and abnormal tire wear. Of these especially check the abnormal tire wear caused by bad localization or low pressure driving on the edge. If any of these damages are discovered, the tire must inspect immediately by a professional. Always remember: Using a compromised tire increases the chance of a blow out. When working in an environment like mines, the best condition possible is called for on rubber manufactured wheels.
4) If the tire wears down to the abrasion informational sign, have it replaced.
Using tires with wear exceeding to the abrasion information sign is dangerous especially when driving in wet conditions because the drainage performance has been greatly reduced.
5) The wheel alignment and balance are important in guaranteeing your tire security and the ideal course number.
If your tire wear is non-uniform, for example: If abrasions to a tire’s embryo shoulder appear sooner than other parts of tread protector, or your vehicle is trembling seriously, it could be due to improper alignment or are not balanced. These situations shorten your tire’s lifespan and compromise your ability to control the vehicle, increasing the chance of an accident.
Always remember: if you discover the abnormal wear or trembling, check the alignment and balance at once. On the work site, when wheel alignment is off, work hours could be lost. Contact the right heavy machinery tire seller immediately for the best to keep your business going
6) Rotate tires regularly.
In order to maintain the best tire wear, it is crucial to rotate them regularly. You can easily refer to the vehicle’s user manual about when to rotate your tires. If you do not have vehicles user’s manual, it is suggests you rotate your tires every 8,000 to 10,000 kilometers.
It is advisable to check your tire wear every month. Your tires should be rotated once you find abnormal wear; even if you drive no more than 8,000 kilometers.
When the directive pattern tire is readjusted, please observe the arrow on the embryo side of it. This arrow shows which way a tire should revolve and you must maintain the correct hand of rotation carefully.
7) Store tires properly to help prevent damage from such sources as sunlight, oil, acid, and\or hydrocarbon erosion.
All tires all should be stored in a cool, dry, and dark room. This is advisable in order to avoid water accumulating inside. If the vehicle is turbo-charged, the liquid could possibly enter the carcass of the tire level through the tire interior impermeable cake, causing sudden damage.